[PP_IFCEXPORT]
Exports BIM models to IFC format
Options:
- Power lines
- Export all powerlines:
If checked, all power lines in the current drawing will be included in the export. - Powerline drop‐down:
If “Export all powerlines” is not checked, you can pick a specific power line from a list.
- Export all powerlines:
- Surfaces
- Export all surfaces:
If checked, every surface in the drawing is exported. - Surface drop‐down:
If “Export all surfaces” is not checked, select a specific surface here.
- Export all surfaces:
- Export selected power line entities
- Select entities that you want to export:
Lets you manually pick individual elements (supports, conductors, insulators, etc.) for export.
- Select entities that you want to export:
- Open IFC file checkbox: if checked .ifc file will be opened in the default application.
- Button OK: export .ifc file.
- Button Cancel: cancels the command.
Note: If you getting message in command line “unable to recognize command” or “PP_IFCEXPORTFAILED”, check which package of the Power Path you have. BIM commands are available in Power Path BIM package.
Watch video tutorial to see how the command works