[PP_ADDCONDUCTORDATA]
Adds new conductor data model
Options:
– Name: unique value.
– Cross section: total conductor cross section.
– Diameter: equivalent conductor diameter.
– Specific weight: depending on the unit settings, either conductor weight per length divided by cross section or
conductor weight per length.
– Elastic modulus: Young’s modulus of elasticity, measure of material’s stiffness, σ=ε·E
– Temperature coefficient: Coefficient of linear expansion per °C.
– Nominal tensile stress: Breaking load divided by cross section.
– Button OK: creates a new model based on the input.
– Button Cancel: cancels the command.
Watch video tutorial to see how the command works