[PP_ADDCONDUCTORS]
Adds new conductors to the power line
Options:
- Powerline: power line name, read-only.
- Name: conductor name, it does not need to be unique.
- Conductor Model: a list of conductor data models.
- From Support: name of the first tension support the conductor will be attached to.
- To Support: name of the last tension support the conductor will be attached to.
- Attachment Points: a list on attachment point names where the conductor can be attached to.
Note: only paired attachment points will be shown, e.g. if Support_101 has the attachment point named “AP1” all supports between it and Support_107 must have attachment points named “AP1”. For more details refer to Appendix 2: Attachment Points on Support.
- Weather and referent conditions: weather and referent conditions models used to calculate catenaries parameters. By default, models chosen in the draw/edit power line will be used.
- Button OK: Applies changes and adds the conductors.
- Button Cancel: cancels the command.
Watch video tutorials to see how the command works