[PP_DRAWPOWERLINE]
Draws new power line by picking the positions of tension supports
Options:
- Power line name: unique name of power line.
- Station: first support station.
Note: the number should be entered as 1234.56 (1+234.5 not supported).
- Support name prefix: a string which each support name starts with. It can be empty.
- Support counter starting value: number of the first support, if it is left empty 0 is assumed.
- Tension support model: support data model which will be used while drawing power line. The value is, also, set as default one for initial value in Add Support dialog.
- Weather and referent conditions: models used for power line calculations. By default, chosen models will be used on when adding addition conductors or ground wires.
- Drape on existing surface checkbox: if checked user can choose a surface which the power line will be draped upon. If no surfaces are loaded into drawing the checkbox will be disabled.
- Pick a surface button: enables user to pick a surface in the drawing.
- Draw button: prompts user to draw the power line. The model is drawn by picking support position one by one.
- Cancel button: cancels the command.
Watch video tutorial to see how the command works